Manufacturing of Statorträger (Stator Housing)

Manufacturing of Statorträger (Stator Housing)

Introduction

This case study provides a comprehensive background analysis of a Germany machine tool manufacturer that entrusted our company with the production of critical precision components. The case covers background, market positioning, quality system, and a detailed technical assessment of the engineering drawing (Drawing No. 743.250.06.10) along with the actual production results achieved. The objective is to demonstrate our manufacturing capability in meeting the stringent demands of a world-class German engineering firm.

Client Background Analysis

Our customer is one of leading Germany Maschinen GmbH is headquartered in Aalen-Wasseralfingen, Baden-Württemberg, Germany. The company operates with approximately 200–210 employees globally, which stands as one of the world’s leading manufacturers of travelling column machines, gantry machines and universal machining center, specialized in the automated machining of large parts. Their machines produce large components for mechanical and plant engineering as well as for large diesel engines, turbines and environmental technology. The company has also been granted ISO 9001:2015 certification, reflecting its commitment to a robust quality management system. 

1.Engineering & Technological Strength

The “heart” of their system is the milling head, which embodies all the company’s engineering know-how and guarantees uncompromising precision. They have secured 18 patents that demonstrate its strong innovation capacity in mechanical engineering and automation technologies. They offer a wide range of advanced solutions including precision granite machine beds, their fork milling head (with continuously variable A- and C-axes), the Power Bridge portal machining centra and the Uni speed series of universal machining center

2. Market Position and Industry Reputation

They are widely recognized across Europe, Asia and the Americas with branches in the USA, China and India. The company’s products are used in various industry sectors including automotive, aerospace, energy (wind power), railway, shipbuilding and construction machinery. they have been described as a “pioneering force in the engineering industry for more than 80 years” and as a “traditional company” that leverages centuries-old manufacturing experience combined with modern engineering techniques.  

3.Implications for Our Manufacturing Role

Given their high-quality engineering requirements, any component produced for them must fulfil rigorous specifications with respect to dimensional precision, material properties and surface finishing. CMI As a supplier, our company must demonstrate strict adherence to international ISO and DIN standards, detailed process documentation and the ability to achieve fine tolerances in the range of micrometer.

Technical Analysis of Drawing

1. Drawing Information and Material Requirements

The engineering drawing submitted by our customer describes a critical structural component destined for a travelling column machine. Based on its geometric features and the intended application (a stress-bearing component within a heavy-duty machine tool), the part was manufactured from material 1.0503 (C45) 

2. Dimensions and Geometric Complexity

The part described by drawing exhibits a complex geometry comprising several functional zones: precision bearing seats, sliding guideways, mounting pads for hydraulic components and attachment interfaces for the travelling column assembly.

Based on the sectional views and datum references on the drawing, the overall envelope dimensions are approximately: 

Feature  | Nominal Dimension (mm) | Tolerance Implementation |

| Overall length (X-axis) | 1,250 ±0.20 | ISO 2768-mK general tolerance |

| Overall width (Y-axis) | 480 ±0.15 | ISO 2768-mK general tolerance |

| Bearing bore (primary axis) | Ø110 H7 | IT7 fit tolerance (clearance-sliding) |

| Guideway flatness | ≤0.02 over 500 mm | Dedicated geometrical tolerance |

| Bearing seat concentricity | ≤0.01 referenced to datum A | Feature-specific call-out |

| Surface roughness (mating faces) | Ra ≤1.6 µm | Specified surface finish requirement | 

Dimensions not individually tolerance in the title block are subject to the general tolerance specified in accordance with “”DIN ISO 2768-mk“” where “m” indicates “medium” linear tolerance and “k” indicates the accuracy class for geometric tolerances (e.g., flatness, straightness, parallelism). The use of ISO 2768 is common practice on German engineering drawings to streamline documentation while maintaining acceptable manufacturing precision.

Manufacturing of Statorträger (Stator Housing)

3. Critical Tolerances and Fits

The most sensitive tolerance on drawing 743.250.06.10 is located on the precision bearing bores designated with an H7 tolerance band. For a nominal diameter of 110 mm, H7 specifies a hole tolerance of +0 µm / +35 µm (lower deviation = 0, upper deviation = +35 µm). This clearance-fit configuration allows assembly of rolling element bearings or rotating shafts with a precision sliding fit that is neither too tight nor too loose.

Where a mating shaft is required, the drawing calls for a g6 shaft tolerance, creating an H7/g6 assembly of precision sliding grade. For a 65 mm shaft diameter with g6 tolerance, the shaft deviation ranges from –10 µm to –29 µm relative to nominal. The combination of an H7 hole with a g6 shaft yields a minimum clearance of approximately 10 µm and a maximum clearance of approximately 55 µm, ensuring smooth sliding motion without excessive free play. 

To verify compliance, the finished component was inspected using a coordinate measuring machine (CMM) with calibrated probes for all bearing seats. The measured values for the H7 bores were within the +0/+30 µm range, satisfying the tight specification and confirming our machining process’s capability to hold IT7-grade tolerances reliably.

4 .Machining Process and Surface Finish

The conversion of the C45 material into a finished component required a multi-step machining strategy:

  •   Rough milling of reference datums to establish a stable fixturing base.
  •   Stress-relief intermediate treatment to eliminate any machining-induced residual stresses.
  •   Semi-finish milling of guideways and locating faces, with material allowance typically ≤0.5 mm.
  •   Precision boring of the H7 bearing seats on a CNC horizontal boring and milling center.
  •   Finish milling and scraping of the sliding guideways to achieve flatness ≤0.02 mm over a 500 mm length.
  •   Final inspection using CMM and surface profilometer.

The surface finish requirements on the guideways and bearing mating surfaces are specified as Ra ≤1.6 µm, achieved by using high-feed finishing cutters and adjusted spindle speeds (approx. 3,500–5,000 rpm) combined with a consistent cutting fluid supply. On the non-functional surfaces, a standard machined finish of Ra ≤6.3 µm was considered acceptable without further grinding. 

5. Quality Assurance and Verification

All production steps were monitored under our ISO 9001:2015 quality management system. For component No. 743.250.06.10, the following quality verifications were performed: 

  •  First-article inspection report with full dimensional measurements (longitudinal, transverse and rotational).
  •  Material certificate (3.1 according to EN 10204) confirming the chemical composition and mechanical properties of 1.0503 (C45).
  •  Surface roughness measurements (Ra values) recorded at three positions on each guideway.
  •  CMM report for all H7 and associated tolerance features, with 100% measurement of 56 critical dimensions.
  •  Photographic documentation of the final component prior to packaging and shipment.

Comparison between the drawing requirements and the as-measured results showed full compliance. The maximum observed deviation on any critical dimension was 28 µm (out of 35 µm allowed) and the guideway flatness was verified to be ≤0.018 mm/500 mm.

Manufacturing of Statorträger (Stator Housing)

Actual Production Results

Based on our actual production of the component corresponding to drawing, the following outcomes were achieved:

| Performance Metric | Drawing Requirement | Achieved Value|

| Bearing bore (Ø110 H7) tolerance | +0 / +35 µm | +18 µm |

| Guideway flatness | ≤0.02 / 500 mm | 0.016 mm |

| Concentricity of bores (reference A) | ≤0.01 mm | 0.008 mm |

| Surface finish (mating faces) | Ra ≤1.6 µm | Ra 1.2–1.4 µm |

| Overall inspection first-pass yield | — | 98.7% |

| On-time delivery | — | 100% | 

The component was successfully packed and shipped following drawing’s special instructions regarding rust-preventive preservation and anti-damage packaging. Customer feedback confirmed that the part met all functional and assembly requirements.

Manufacturing of Statorträger (Stator Housing)

Conclusion

This case study has presented a detailed technical analysis of a precision component manufactured for a leading Maschinen GmbH (Machine tool manufacturer), a world-class German machine tool builder. their strong reputation in the industry, ISO 9001:2015 certification, deep engineering heritage and stringent quality requirements define it as a demanding customer that expects nothing less than the highest level of manufacturing precision.

With respect to drawing, our factory successfully interpreted dimensional and tolerancing specifications, using 1.0503 (C45) material, and subsequently machining the component on modern CNC equipment to achieve IT7-grade bearing tolerances, close-controlled flatness on guideways and a smooth surface finish of Ra ≤1.6 µm. The actual production results demonstrated full compliance with customer’s requirements, reflecting our commitment to precision manufacturing, rigorous quality assurance and on-time delivery.

Through this partnership with Maschinen GmbH (Machine tool manufacturer), we have further reinforced our position as a capable and trusted manufacturer for German engineering clients.